CAPTURE=DISABLE, CHSEL=CC0, BLANK=START, SRC=DISABLE, HALT=DISABLE
Recoverable Fault A Configuration
| SRC | Fault A Source 0 (DISABLE): Fault input disabled 1 (ENABLE): MCEx (x=0,1) event input 2 (INVERT): Inverted MCEx (x=0,1) event input 3 (ALTFAULT): Alternate fault (A or B) state at the end of the previous period |
| KEEP | Fault A Keeper |
| QUAL | Fault A Qualification |
| BLANK | Fault A Blanking Mode 0 (START): Blanking applied from start of the ramp 1 (RISE): Blanking applied from rising edge of the output waveform 2 (FALL): Blanking applied from falling edge of the output waveform 3 (BOTH): Blanking applied from each toggle of the output waveform |
| RESTART | Fault A Restart |
| HALT | Fault A Halt Mode 0 (DISABLE): Halt action disabled 1 (HW): Hardware halt action 2 (SW): Software halt action 3 (NR): Non-recoverable fault |
| CHSEL | Fault A Capture Channel 0 (CC0): Capture value stored in channel 0 1 (CC1): Capture value stored in channel 1 2 (CC2): Capture value stored in channel 2 3 (CC3): Capture value stored in channel 3 |
| CAPTURE | Fault A Capture Action 0 (DISABLE): No capture 1 (CAPT): Capture on fault 2 (CAPTMIN): Minimum capture 3 (CAPTMAX): Maximum capture 4 (LOCMIN): Minimum local detection 5 (LOCMAX): Maximum local detection 6 (DERIV0): Minimum and maximum local detection 7 (CAPTMARK): Capture with ramp index as MSB value |
| BLANKPRESC | Fault A Blanking Prescaler |
| BLANKVAL | Fault A Blanking Time |
| FILTERVAL | Fault A Filter Value |